Online MTool

Introductory

To facilitate transfer, pledge, delegate, and governance operations, Alaya provides MTool to assist users:

• MTool supports Ubuntu 18.04 and Windows 10. This document describes the installation and use of Windows and Ubuntu, respectively. Users can choose from their own resources.
• MTool provides two signature methods for transactions such as pledge: online signature and offline signature.This document describes online signing operations. For offline signing operations, refer to the Offline MTool Manual。

Install MTool

In addition, this document introduces the operation of MTool under Windows and Ubuntu respectively. Users can choose according to their own resources.

Install MTool under Windows

Preparation before installation

execute command:

alaya_mtool --version

If the execution result shows error message, it indicates that the MTool has not been installed and you can skip the following instructions on how to uninstall the older version.

If the execution result shows the version number, timestamp and other information, it indicates that MTool has been installed. If the MTool is an old version, you need to back up important information at this time, and then manually uninstall the old version. The instructions are as follows:

Step1. Backup directory

Back up the C:\alaya_mtool\mtool\current\keystore and C:\alaya_mtool\mtool\current\validator directories to other directories (do not back them up to C:\alaya_mtool). After installing the new version, you need to copy the backup directory back to the C:\alaya_mtool\mtool\current\ directory. (If the installation directory is a custom directory, the actual one shall prevail)

Step2. Uninstall old version

Double-click C:\alaya_mtool\unins000.exe to uninstall all old versions of MTool and other business tools.

Start installation

Step1. Download MTool installation package

On the online machine, copy the link https://download.alaya.network/alaya/mtool/windows/0.16.2/alaya_mtool.exe to the browser and download the MTool installation package.

Step2. Install MTool

Double-click alaya_mtool.exe to install it. The default installation directory is C:\alaya_mtool, and it is recommended not to change this installation directory. The pop-up interface displays the message Completing the mtool Setup Wizard, indicating that the installation was successful. Click Finish.

Step3. Restart the terminal

After installation is complete, you need to restart the terminal for the newly added environment variables to take effect.

Install MTool under Ubuntu

Preparation before installation

Back up the ~/alaya_mtool/keystore and ~/alaya_mtool/validator directories to other directories (do not back them up to ~/alaya_mtool). After installing the new version, you need to copy the backup directory back to the ~/alaya_mtool/ directory. (If the installation directory is a custom directory, the actual one shall prevail)

start installation

Proceed as follows:

Step1. Download MTool toolkit

wget http://download.alaya.network/alaya/mtool/linux/0.16.2/alaya_mtool.zip

Step2. Extract the MTool toolkit

(if ! command -v unzip;then sudo apt install unzip; fi;) && unzip alaya_mtool.zip && cd alaya_mtool

Step3. Download script

The script is downloaded to the alaya_mtool directory, otherwise the script cannot find the path of the new version of mtool.

wget https://download.alaya.network/alaya/scripts/mtool_install.sh

Step4. Execute command

chmod +x mtool_install.sh && ./mtool_install.sh

• When the message Install mtool succeed. is displayed, MTool is successfully installed. If it is not successfully installed, please contact our official customer service to provide feedback on specific issues.

Step5. Restart the session window

After installation is complete, you need to restart the session window for the newly added environment variables to take effect.

MTool Environment Variable Description

The environment variables of MTool directories under Windows and Ubuntu are different:

• MTool directory
  • Windows: %ALAYA_MTOOLDIR%
  • Ubuntu: $ALAYA_MTOOLDIR

Note:Users choose according to their installed system.

MTool Command Details

Note: The follow-up command is the command format under Ubuntu. Under Windows, you need to modify $ALAYA_MTOOLDIR to %ALAYA_MTOOLDIR%.

Create A Wallet

• Execute the command:

alaya_mtool account new staking

• Parameter description

staking: The name of the wallet to be created. Once the wallet is created successfully, a wallet file named staking.json will be generated in the directory $ALAYA_MTOOLDIR/keystore, And print the following information:

-name: staking-type: NORMAL-address:address: atp124xmsmd0uf5cvk7v3s36eytqezqsjfcxscu8yv-public key: 0x9521cd81ba28d5d1c23bb7ddb7042d146375203d35000c0289178027abd4dc09bca30257739df166201e73497485242f41d5f50d46bc3c7e4385f81bde560db0Important write this Private Key in a safe place.It is the important way to recover your account if you ever forget your password.4630b6d86bc74bffd4ca8cfc18bceec562cb40fc5080c258452a04a69bc1ee07
Important write this mnemonic phrase in a safe place.It is the important way to recover your account if you ever forget your password.worry jewel penalty jealous expect embark outer eternal verb rebuild rice kidney

Wallet address format adjusted to Bech32, among them:

atp124xmsmd0uf5cvk7v3s36eytqezqsjfcxscu8yv: Main network account address, beginning with atp;

4630b6d86bc74bffd4ca8cfc18bceec562cb40fc5080c258452a04a69bc1ee07 : the private key of the wallet;

worry jewel penalty jealous expect embark outer eternal verb rebuild rice kidney: the mnemonic words.

For security reasons, users need to back up the wallet private key or mnemonic words (both can be backed up, or one of them can be backed up). When the wallet is lost, it can be used for recovery. It is recommended that users back up mnemonic words or private keys to a secure storage medium, such as an offline machine.

Recover wallet file

If the wallet file is lost, you can restore it with the backed up private key or mnemonic as follows:

• Execute the command:

  Recovery via private key:

  alaya_mtool account recover -k staking

  Prompt to enter the new wallet password and backup private key, as follows:

  Enter a passphrase to encrypt your key to disk:Repeat the passphrase:Enter your 64bit Private Key:4630b6d86bc74bffd4ca8cfc18bceec562cb40fc5080c258452a04a69bc1ee07

  or

  Recovery through mnemonics:

  alaya_mtool account recover -m staking

  Prompt to enter a new wallet password and backup mnemonic words, as follows:

   Enter a passphrase to encrypt your key to disk: Repeat the passphrase: Enter your bip39 mnemonic: worry jewel penalty jealous expect embark outer eternal verb rebuild rice kidney

• Parameter description

  staking：wallet name.

  After successful restoration, the wallet file staking.json will be generated under the directory $ALAYA_MTOOLDIR/keystore.

Ordinary transfer operation

• Command line

alaya_mtool tx transfer --keystore $ALAYA_MTOOLDIR/keystore/staking.json --amount "1" --recipient $ to_address --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameter Description

keystore: path of the wallet sending the transaction

amount: transfer amount, unit: ATP

recipient: receiving address

View wallet list

• Command line

alaya_mtool account list

Query balance based on wallet name

• Command line

alaya_mtool account balance $keystorename --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameter description

$ keystorename: wallet file name，example:staking.json

Query balance based on address

• Command line

alaya_mtool account balance -a $address --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameter description

a: wallet address

Create a new restricting plans

Creating a new restricting plan, node's ATPs will be transferred to a specified precompiled contract. The ATPs will be transferred to the specified account multiple times at specified intervals. Before creating a new restricting, you need to create a restricting plan description file in json format.

• restricting plan description file，restricting_plans.json

{  "account": "atp12jn6835z96ez93flwezrwu4xpv8e4zatwxj7ju",  "plans": [    { "epoch": 5000, "amount": 100 },    { "epoch": 6000, "amount": 100 },    { "epoch": 7000, "amount": 100 }  ]}

account：the specified account that will received ATP from the estricting plan.

epoch：the number of epoch to wait for a transfer plan (Greater than or equal to 1)

amount：the number of ATP to be transferred. Unit: ATP

• command line

alaya_mtool create_restricting --config $ALAYA_MTOOLDIR/validator/validator_config.json --keystore $ALAYA_MTOOLDIR/keystore/staking.json --file ./restricting_plans.json

• Parameter Description

config：node configuration file

keytore: wallet file

file: restricting plan description file

Initiate a staking operation

If the deployment of the consensus node is complete and the block has been synchronized successfully, you can use MTool for staking operations. After the staking fund application is completed, ensure that the balance of the staking account is sufficient, and replace the staking amount according to the user's situation. The minimum threshold for staking is ten thousand ATP.

Note: Please keep enough ATP in the staking account, so that the transactions initiated by the subsequent node management have sufficient transaction fees, such as voting for upgrading proposals, and unsecured transactions.

• Command line

alaya_mtool staking --config $ALAYA_MTOOLDIR/validator/validator_config.json --keystore $ALAYA_MTOOLDIR/keystore/staking.json --amount 10000 --benefit_address xxx196278ns22j23awdfj9f2d4vz0pedld8a2fzwwj --delegated_reward_rate 5000 --node_name myNode --website www.mywebsite.com --details myNodeDescription --external_id 121412312

Prompt:please input keystore password:Enter the password of the staking wallet and press Enter. If the following information is displayed, the staking is successful:

operation finishedtransaction hash:0x89b964d27d0caf1d8bf268f721eb123c4af57aed36187bea90b262f4769eeb9bSUCCESS

• Parameters Description

config：node configuration file

keystore: staking wallet file

amount: staking amount, not less than 10000ATP-staking threshold, no more than 8 decimal places

restrictedamount: not less than 10000ATP-staking threshold, no more than 8 decimal points (staking using locked balance)

autoamount: Not less than 10000ATP-Priority to use the lock-up balance staking, if the lock-up balance is not enough for the staking deposit, then use free amount staking

benefit_address: benefit account to receive block-packing reward and staking reward

delegated_reward_rate：Delegated bonus ratio, type is integer range is [0,10000], unit: ten thousand percent, e.g. enter 5000, it means the bonus ratio is 50%

nodename：node name，30 bytes(beginning with a letter, including alphabet, number, space, , -, #)

website：node website, 30 bytes

details：node description, 280 bytes

external_id：node Icon ID of keybase.io, or identity authentication ID

Modify validator information operation

• Command line

alaya_mtool update_validator --config $ALAYA_MTOOLDIR/validator/validator_config.json --keystore $ALAYA_MTOOLDIR/keystore/staking.json --node_name myNode --website www.mywebsite.com --external_id 121412312 --delegated_reward_rate 6000 --benefit_address atp1x0f9xwr9steccekttqvml0d26zgsxwdnt4f55x --details "Modify the verifier information operation"

• Parameters Description

config：node configuration file

keystore: staking wallet file

benefit_address[option]: benefit account to receive block-packing reward and staking reward

delegated_reward_rate[option]：Delegated bonus ratio, type is integer range is [0,10000], unit: ten thousand percent, e.g. enter 5000, it means the bonus ratio is 50%

nodenam[option]e：node name，30 bytes(beginning with a letter, including alphabet, number, space, , -, #)

website[option]：node website, 30 bytes

details[option]：node description, 280 bytes

external_id[option]：node Icon ID of keybase.io, or identity authentication ID

Decommissioning operation

**It takes 168 settlement cycles to withdraw from the pledge, please be careful!**

• Command line

alaya_mtool unstaking --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameter Description

None

Increase staking operation

• Command line

alaya_mtool increasestaking --amount 5000000 --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameters Description

amount: Use the account balance to increase the staking amount (ATP), the minimum added value is not less than 10, and the decimal point does not exceed 8 digits

restrictedamount: use the account balance to increase the amount of staking, not less than 10 staking threshold, the decimal point does not exceed 8

Submit Text Proposal

• Command line

alaya_mtool submit_textproposal --pid_id 100 --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameter Description

pid_id: GitHub ID

Submit upgrade proposal operation

• Command line

alaya_mtool submit_versionproposal --newversion 0.16.0 --end_voting_rounds 345 --pid_id 100 --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameters Description

newversion: target upgrade version, x.x.x, number punctuation

end_voting_rounds: the number of voting consensus rounds, the number of voting consensus rounds N, must satisfy 0 < N <= 4838 (about 2 weeks)

pid_id: GitHub ID

Submit Cancel Proposal

• Command line

alaya_mtool submit_cancelproposal --proposalid 0x444c3df404bc1ce4d869166623514b370046cd37cdfa6e932971bc2f98afd1a6 --end_voting_rounds 12 --pid_id 100 --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameters Description

proposalid: the ID of the proposal that needs to be cancelled

end_voting_rounds: the number of voting consensus rounds, the number of voting consensus rounds N, must satisfy 0 < N <= 4838 (about 2 weeks)

pid_id: GitHub ID

Text proposal voting operation

• Command line

alaya_mtool vote_textproposal --proposalid 0x444c3df404bc1ce4d869166623514b370046cd37cdfa6e932971bc2f98afd1a6 --opinion yes --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameters Description

proposalid: text proposal ID, that is, the hash of the proposal transaction, 66 characters, alphanumeric

opinion: voting options, yes, no, abstain-choose one

Upgrade proposal voting operation

• Command line

alaya_mtool vote_versionproposal --proposalid 0x444c3df404bc1ce4d869166623514b370046cd37cdfa6e932971bc2f98afd1a6 --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameter Description

proposalid: upgrade proposal ID, that is, the hash of the proposed transaction, 66 characters, alphanumeric

Cancel proposal voting

• Command line

alaya_mtool vote_cancelproposal --proposalid 0x444c3df404bc1ce4d869166623514b370046cd37cdfa6e932971bc2f98afd1a6 --opinion yes --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameters Description

proposalid: Cancel the proposal ID, that is, the hash of the proposed transaction, 66 characters, composed of alphanumeric characters

opinion: voting options, yes, no, abstain-choose one

Submit parameter proposal operation

• Command line

alaya_mtool submit_paramproposal --pid_id 200 --module $ module --paramname $ paramname --paramvalue $ paramvalue --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameters Description

module: governance module parameters

paramname: the name of the governance module parameter, pay attention to the case of the letters

paramvalue: Governance module parameter value

pid_id: GitHub ID

Parameter proposal voting operation

• Command line

alaya_mtool vote_paramproposal --proposalid 0x444c3df404bc1ce4d869166623514b370046cd37cdfa6e932971bc2f98afd1a6 --opinion yes --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameters Description

proposalid: Cancel the proposal ID, that is, the hash of the proposed transaction, 66 characters, composed of alphanumeric characters

opinion: voting options, yes, no, abstain-choose one

Version declaration operation

• Command line

alaya_mtool declare_version --keystore $ALAYA_MTOOLDIR/keystore/staking.json --config $ALAYA_MTOOLDIR/validator/validator_config.json

• Parameter Description

None

View help

• Command line

alaya_mtool -h

• Parameter Description

None